Kirby Morgan Hat Technician Course

Two-Day Course: 

Kirby

The Helmet and Band Mask course is designed and intended to teach commercial divers, tenders, and technicians how to perform routine maintenance, annual inspections, and repair of Kirby Morgan Helmets and Band Masks and instructs personnel in the KMDSI/Dive Lab recommended configuration and use of KMDSI Helmets and Band Masks.

Kirby Morgan Hat Technician Course Dates

Register for the Kirby Morgan Course

Course Details:

-Use of Kirby Morgan Operational Check Lists A2.1 thru A2.6
-Helmet and Band Mask annual overhaul procedures
-How to properly log maintenance and repairs
-Cleaning and sanitizing
-Face Port Insert inspection and testing
-Monthly helmet inspection procedure
-Daily pre/post dive procedures
-Supervisor pre-dive inspections
-Supervisor in water checks
-EGS interface procedures and configurations
-Calculation of proper supply pressure and volume requirements
-How to teach the KMDSI Helmet/Band Mask Operator/User Course.

The course instructs personnel how to correctly overhaul the demand regulator side block and all associated Helmet and Band Mask components, and also teaches what repairs should only be accomplished by dealers or those with specialized training.  This course was set up to enable large and small diving companies, as well as freelance divers to inspect, maintain, annually overhaul and perform most repairs using the manufacturers’ recommended procedures and guidelines.  This course does not teach face port insert replacement or fiberglass and gel coat repair; these repairs must be completed by an authorized KMDSI dealer trained in these repairs.  However, it does teach identification of insert and fiberglass damage and how and where to have repairs done.  Upon completion, each student will receive a certification valid for three (3) years for the individuals to maintain their own equipment and/or the company’s or affiliate companies’ equipment for which the individual works, as well as equipment belonging to other diving employees of the company as dictated by company policy.  Once the training has been completed, the Technician is authorized and encouraged to teach the KMDSI Operator/User Course using the curriculum and guidelines set-up by KMDSI and Dive Lab, Inc. per company policy.  The main purpose for this is to expand the knowledge and training within the commercial diving industry using trained persons, thus raising the level of awareness and safety pertaining to the proper use and maintenance of KMDSI Helmets, Band Masks and associated equipment.

Cost:

$500.00 for the two (2)-day course (all Helmets & Band Masks). Due to the limited amount of spaces, a $100.00 non-refundable application fee (due two weeks before the class start) is required to hold your space. This amount will be credited toward the total cost.  The remaining balance is due by the first day of class.

Hat Classes have a maximum of 8 students per class (per Kirby Morgan requirements to ensure quality of education.) If the class you select fills up, you can be placed on a waiting list. If you aren’t moved from the waiting list to the class you selected, your $100 fee is transferable to another class or is refundable. Registrations are processed on a first-come first-serve basis.

Note:

With this training, you will be trained to perform repairs on your own equipment and the company’s equipment where you work, as well as equipment owned by other diving employees of the company you work for.  The training brings the technician into the specialized KMDSI/Dive Lab program, allowing for advice and assistance in all equipment problems and issues.  All technicians receive KMDSI technical updates and bulletins, as well as newsletters.  The KMDSI Technician Course allows the student to repair only his equipment or the equipment of divers in his company; it does not allow the Technician to do repairs for profit.  ONLY KMDSI DEALERS CAN PERFORM REPAIRS FOR PROFIT.  Non-Kirby Morgan dealers and persons not trained in accordance with Dive Lab guidelines that perform repairs for profit, do so against the recommendation of KMDSI and Dive Lab.  Non-KMDSI certified persons that pose as certified KMDSI/Dive Lab trained technicians are a serious safety threat to the diving industry and all users of KMDSI equipment.  Dive Lab trained technicians working for diving contractors or as freelance divers cannot perform repairs for profit, and may only work on their own equipment, company equipment, and equipment belonging to the employees of the company, as dictated by company policy.  This is done to prevent persons from trying to become backyard helmet mechanics.  All work and repairs must be documented.  Any helmets and masks presented for work that do not have a log book showing work history must be overhauled in accordance with Appendix A2.1.

*This post-graduate course is separate from the components of the core diving program and therefore is not accredited by the ACCSC. Any accreditation and certifications pertaining to the course are listed within the course description.*

Classes Held Monthly!

(Maximum of 8 students per class)

For more information on class dates and availability e-mail hatclass@diversinstitute.edu or give us a call (800) 634-8377.

Kirby Morgan Hat Technician Course Dates

Register for the Kirby Morgan Course